Rapid flow testing is suitable for mass production of the nozzle, valve, etc

Flow range: 0～10L/min

This tester has a Chinese & English bilingual interface, and is specially designed to measure the gross leakage

Pressure Range: -90kPa～990kPa

This universal leak tester is suitable for large, medium and small leakage detection

Pressure Range: -90kPa～990kPa

The tester is suitable for the conditions where low pressure leak test is required such as detection of gas stoves, water heaters, and medical infusion apparatus

Test Pressure Range: 0.5～50kPa

The tester is suitable for the compound pressure leak detection of one device

Test Pressure Range:
-100kPa～900kPa

This tester has no master

Test Pressure Range:
99.9kPa～999kPa

Linear fitting test method

Test pressure range:
-99.9～5.1MPa

This multi-functional tester has a Chinese & English bilingual interface

Test pressure range:
-90kPa～20MPa

This multi-functional tester has a Chinese & English bilingual interface

Test pressure range:
-90kPa～3.5MPa

Air pressure units can be centrally controlled by external circuit and it is suitable for integrated installation. Multiple objects can be measured simultaneously.

Test Pressure Range:
-100kPa～990kPa

This tester can simultaneously detect multiple artifacts (maximum 16 channels)

Minimum detectable leak rate:
5×10^-8Pam³/s

This tester uses mixed gas containing 5% Hydrogen and 95% Nitrogen as a tracer gas which is non-flammable safe gas approved by ISO10156 : 2010.

Minimum detectable leak rate：5×10-8Pam3/s

This international first-class system can be customized with varied leak detection systems and fixture & tools

This spray can be used under - 45 ℃ using extrusion method

Sensitivity: 1×10^-6Pa.m³/s

The Leak Detection Spray leaves a thin uniform film that accurately identifies any leaks of joints by the forming bubbles.

Sensitivity:
1×10-6Pa.m3/s

This system is suitable for small SMD products and the detection process is fully automatic including fine detection, gross detection, and helium pressurization

Test rate: 1.2～2sec/piece

This system is suitable for small SMD products including resonators, oscillators, capacitor, and resistance, etc. 

Test rate: 10～20sec/piece

This system is suitable for small SMD products including resonators, oscillators, capacitor, and resistance, etc. 

Test rate: 1～2.5 sec/piece

This system is suitable for sealed products including SMD , SAW and resonators.It is also a fine detection system of high efficiency and automation.

Test rate: 1sec/piece

This system is suitable for small SMD products and the detection process is fully automatic including fine detection, gross detection, and helium pressurization.

Test rate: 1～2sec/piece